Home & organization

Configure a custom remote control holder online and adjust Length, Width and Depth to your application.

Configure a custom box with lipped lid online and adjust Wall thickness and Specific dimension to your application.

Configure a custom wall-mounted box online and adjust Radius, Length, Width and Height to your application.

Configure a custom box online and adjust Width, Depth, Height and Wall thickness to your application.

Configure a custom rounded tray online and adjust Length, Width, Height and Wall thickness to your application.

Configure a custom grid organizer stand online and adjust Diameter, Height, Thickness and Quantity to your application.

Configure a custom convex-front tray online and adjust Length, Width, Height and Specific dimension to your application.

Configure a custom cup online and adjust Height, Outer diameter and Wall thickness to your application.

Configure a custom suction nozzle online and adjust Diameter, Length and Outer diameter to your application.

Configure a custom round cap online and adjust Hole diameter and Specific dimension to your application.

Configure a custom square cap online and adjust Hole diameter to your application.

Configure a custom rectangular cap online and adjust Hole diameter to your application.

Configure a custom screw-top container online and adjust Diameter, Height, Wall thickness and Specific dimension to your application.

Configure a custom grid organizer online and adjust Quantity and Specific dimension to your application.

Match opening size and two-axis spacing to six existing buttons.

Store cards with sleeves and lift even short stacks through the open finger channel.

Custom drawer insert with variable compartments, rounded corners and optional finger scoops.

Custom grid organizer with adjustable outer dimensions, compartment count and finger notches.

Small parts organizer with adjustable dimensions, compartment layout and fitted sliding lid.

Moisten gummed paper edges with your own felt covering.

Configure a window drainage slot cover to your dimensions: choose slot width, height and hood depth, with side adhesive ears and an open lower outlet.

Replace a broken frame corner: set insert width, profile height and leg length. Flat 90° connector for matching hollow profiles.

Configure a replacement handle for an accessible rectangular pleated blind rail: set rail size, grip width and paddle length, with a separate clamp screw.

Replace a side guide shoe on a straight hollow bottom rail. Match peg section, engagement and flange to the existing shutter.

Make an insert for an open drain: set basket diameter, height and slot width. Perforated floor and slotted sidewall.

Hold folded bag edges together: set clip length, clear gap and insertion depth. One-piece U clip with tapered entry.

Bring two straps together at the back: adjust strap width, centre bridge and plate thickness. Flat connector with two open guides.

Keep using short pencils: set shaft size, socket depth and extender length.

Support your grip on a light recorder: set body diameter, rest projection and clip width. Open clip with rounded thumb tab.

Slide-on stop for rectangular temples: choose socket width, height and fin length.

Keep reading glasses within reach: adjust bridge-support height and width plus the base footprint. The bridge rests on a rounded support.

Hold book pages open with two rounded wings and set the thumb opening and span.

Replace a broken lid tab: configure reach and hinge pin. STL file or printed part.

Add grip to a screw cap with a ribbed TPU ring and two wings. Match contact diameter, height and wing dimensions to the particular lid you want to turn.

Match notebook capacity and punched paper: set disc diameter, rim and web thickness.

Match a shower curtain to your rod and height: set rod opening, drop and lower hook width. Open S hook.

Give narrow handles a broader grip: adjust grip length, channel width and wall thickness. Open rounded shell for existing bag handles.

Drop in a label roll without an axle and pull the backing paper back over a blunt edge.

Cover a visible hinge barrel: set inner diameter, length and rear slot.

Configure the neck opening, base diameter and support height of a bottle drainer. Generate an STL for 3D printing.

Cover worn round stick heads: choose inside diameter, depth and lip overlap.

Rest a controller on its two grips. Match cradle spacing, width and length to the actual grip shape.

Limit glider travel: match head width, head height and neck width to the track.

Arrange closed round spice jars in a drawer using cradles matched to their size.

Gently detangle hair: choose tooth spacing, tooth length and handle length.

Add a collector to your hand sharpener: configure its seat and bin height.

Replace missing soft clip pads: adjust jaw width, thickness and insertion depth.

Replace a missing roll carrier: set core fit, body width and both stub dimensions.

Find the tape end again: set roll width, leg depth and tab length.

Offset two light hangers vertically: choose eye width, drop and hook gap.

Broaden thin hanger arms: adjust rod diameter, saddle length and shoulder width.

Grip round chalk with a soft sleeve: set diameter, length and wall.

Bridge a crack in a straight refrigerator drawer handle rim. Match sleeve length, panel slot and engagement to the existing front.

Attach a separate round retaining rail to a straight door-bin rim. Adjust rod bore, engagement and mounting slot. Set your dimensions, 3D print and check the fit on.

Store a closed laptop upright: match slot width, support length and side height to the case. Open slots in the base.

Isolate lines on paper: adjust window width, line height and border width. Flat reading mask as an STL model.

Collect paper chads: adjust the rectangular fit and cover depth.

Configure a compact palette for model painting and watercolours: choose well count, diameter and depth. Rounded bottoms help gather small amounts of paint.

Hold an existing round cap on the desk: choose socket, insertion depth and base width.

Display round coin capsules upright: set diameter and capsule thickness. Curved seat with a low front lip.

Rest a round bottle in an inclined pocket with a custom diameter, depth and angle.

Keep a pen beside your notebook with a custom cover gap and pen diameter.

Store dry folded filters within reach: choose width, support height and stack space.

Set the label holder’s length, front height and shelf gap. Generate a made-to-measure STL for 3D printing.

Rest closed round containers on a flat: choose bore, ring width and wall allowance.

Attach light paper decorations: adjust head diameter, stem diameter and plate thickness.

Replace worn tread while retaining a sound wheel core. Match inside diameter, width and ribs to the robot wheel. Set your dimensions, 3D print and check the fit on.

Identify flat keys: adjust the inside width, head height and thickness of a flexible sleeve with an open end and ring window.

Bundle frayed lace ends: set bore, length and wall thickness.

Thread flat lace ends behind the eyelet: choose lace width, slot gap and bridge spacing.

Guide your heel into a shoe: configure length, width and crosswise curvature.

Store empty shoes in shape: adjust length, width and dome height. Rounded toe-box insert with three ventilation slots.

Stand a kitchen sponge upright: choose length, clear sponge thickness and holder height. Open slats and a base opening provide air and drainage paths.

Configure a soap dish for a narrow sink ledge: adjust length, width and slope. Raised ribs keep the bar above the draining base.

Shorten pump travel: set stem diameter, collar height and tab length.

Centre singles on your turntable: adjust outside diameter, spindle bore and grip height. Low adapter with three open windows.

Replace a broken vacuum tube parking tongue. Size the T-head to the receiver and secure the base to the tube with two straps.

Keep a sound small roller and replace its broken mounting fork. Set clear width, axle bore and screw spacing. Set your dimensions, 3D print and check the fit on the.

Replace a missing pen clip: set barrel diameter, clip length and tip clearance.

Replace one spindle end: set plug diameter, support peg and peg length.

Slide along soft tubes from the sealed end with a slot length and gap matched to the tube.

Replace a lost keeper: choose clear width, strap-stack height and loop width.

Display a closed watch bracelet on a fitted oval support. Set outer width, outer height, support depth and base clearance.

Centre a matching movement in its case: set bore, radial wall and height.

Renew a cloth grip: choose round opening, panel thickness and membrane thickness.

Fit your manual toothbrush: configure head clearance and neck opening.

Guide album pages when closing: set ring spacing, reach and lift.

Match the needle circle and grip to your basket and hand.

Sort round coins or flat tokens using three diameter thresholds.

Collect matching coins or tokens up to a calculated stack height.

Repair a damaged fabric vane top with a custom vertical blind clip. Set fabric gap, width and hanging eye, then bond onto an adequately strong fabric area.

Replace a broken slider on a lightweight panel curtain. Match head, neck and connecting tab to the rail and existing carrier.

Customize an organic makeup brush holder with a name, vertical waves, side compartments and lipstick slots.

Personalized designer pen holder with custom name, font and selectable compartments – fast online configuration.

Design a made-to-fit planter cover online: enter your pot dimensions and customize fit, shape, waves and twist – as an STL or 3D print.

Design a custom wave vase online: adjust size, opening, body shape, waves and twist – available as an STL or 3D-printed vase.

Replace a damaged curved track in a manually operated tambour cabinet. Match channel width, depth and inside radius to slats and rails.

Cover old wall marks around a replacement intercom with a custom flat trim frame. Set the opening, border size and offset using the measuring guide.

Configure an adapter frame for an unmodified rectangular vacuum bag collar, with retaining cover. Check the original seal and appliance operation separately.