Wohnen & Design

Custom vertical blind vane repair clip with hanging eye

Name: Custom vertical blind vane repair clip with hanging eye
Brand: BuildYour3D
SKU: lamellenvorhang_reparaturclip
Price: 3.66 EUR
Availability: InStock

Repair a damaged fabric vane top with a custom vertical blind clip. Set fabric gap, width and hanging eye, then bond onto an adequately strong fabric area.

0 Likes

★★★★★

0.0/5 · 0 Ratings

🧩 Configure now ← Back to category

parameters

7 adjustable

Variants

0 ideas

If a fabric vane has torn at its hanger, a small bonded clip can grip intact fabric near its upper edge. Two laterally open cheeks surround the fabric; the new eye uses the existing hook. Hanging height may change. What you can customise: Match the slot to fabric and adhesive. Choose clip width, engagement and eye diameter. Open sides accommodate vanes wider than the clip. How to measure: 1. Measure fabric without crushing it and add adhesive layers. 2. Check intact fabric below the tear and clearance to neighbouring vanes. 3. Measure the existing hook and intended new eye height. Assembly and trial fitting: 1. Dry-fit over the fabric edge without stretching the material. 2. Apply a thin compatible fabric/plastic adhesive layer to both sides and let it cure. 3. Hang the eye and check alignment, floor clearance and rotation. 3D printing notes: PETG is a starting point; print on the supplied narrow side with a brim. Support outside beneath the eye if needed; keep supports out of the fabric slot. Fit and included geometry: One repair clip; adhesive separate and original hook retained. For light fabric vanes with sufficient sound material; not a track carrier repair and no rated load.

🧩 Configure now

Recommendations

Best from Wohnen & Design

View all →

Custom track slider for panel curtain carriers

Replace a broken slider on a lightweight panel curtain. Match head, neck and connecting tab to the rail and existing carrier.

Personalized Makeup Brush and Cosmetic Organizer

Customize an organic makeup brush holder with a name, vertical waves, side compartments and lipstick slots.

Personalized Designer Pen Holder with Name

Personalized designer pen holder with custom name, font and selectable compartments – fast online configuration.

Custom Planter Cover – Made to Fit Your Plant Pot

Design a made-to-fit planter cover online: enter your pot dimensions and customize fit, shape, waves and twist – as an STL or 3D print.

Custom Wave Vase – Design Your Own Vase

Design a custom wave vase online: adjust size, opening, body shape, waves and twist – available as an STL or 3D-printed vase.

Custom 90° corner track for tambour cabinets

Replace a damaged curved track in a manually operated tambour cabinet. Match channel width, depth and inside radius to slats and rails.

FAQ

Frequently asked questions

What is Configurable 3D component intended for?

Configurable 3D component is a configurable model in the Wohnen & Design category. When an off-the-shelf part does not fit, configure this parametric configurable 3d component for your project: adjust the dimensions, check the preview, download the STL or order the 3D… It is suitable as a starting point for 3D printing or technical review.

Which dimensions can I adjust for Configurable 3D component?

The available input fields define the dimensions of the generated model, for example Width, Depth, Specific dimension, Wall thickness. Please check the preview and the displayed overall dimensions before ordering.

Is the STL generated from my inputs?

Yes. The STL is generated from the entered parameters and prepared for download or email delivery after payment.

Can I open the STL in Bambu Studio, Cura or PrusaSlicer?

The generated STL is suitable as a starting point for common slicers. Please review orientation, scale, material and print settings in your slicer software.

Do I need to check dimensions and tolerances before buying?

Yes, please check dimensions before ordering. Fit, strength and tolerances depend on material and print settings; the preview and overall dimensions help with verification.

Which material is suitable for Configurable 3D component?

PLA is useful for samples and simple parts, PETG for tougher applications and ASA for outdoor or higher-temperature use. Load, tolerance and print orientation matter.

Can I download Configurable 3D component as an STL or order it printed?

Yes. After configuration you can use the generated model for STL download or continue to the 3D printing order flow with price calculation.

What are typical uses for Configurable 3D component?

Typical uses include custom dimensions, repairs, prototypes and mounting aids in the Wohnen & Design category. For functional parts, always verify load and fit in the final application.

Ratings

What andere sagen

★★★★★

0.0/5 · 0 Ratings

Submit rating

Please Name, E-Mail, Sterne and Kommentar eintragen.

Name

Wed nur zur Spam-Abwehr genutzt (im Backend gehasht gespeichert).

Rating

★★★★★

Comment

Fotos (optional)

Bis zu 5 Bilder, JPG/PNG/WebP, maximal 5 MB pro Bild.

Latest reviews

Noch no Bewertungen – sei der Erste 🙂