adapter

Connect a dust hose to an existing bayonet socket: customise the spigot, insertion length and two opposed lugs to the measured connector geometry.

Customizable mounting plate for 2020, 3030 and 4040 aluminum extrusion profiles.

Fit a lens to a compatible large-format camera: configure board dimensions, rear register and lens opening, with an adjustable vertical hole offset.

Custom repair plate for damaged or torn-out cabinet hinges.

Customizable Y adapter for splitting cable conduits, cable ducts and protective tubes.

Customizable cable passthrough with round flange and four screw holes.

Custom replacement clip adapter for car floor mats.

Custom adapter for lamps, canopies and non-matching ceiling holes.

Custom adapter for vacuum, dust extraction, hose and machine ports – round, oval or rectangular, straight, angled or offset.

Inclined mounting-plate adapter for round tubes with a universal hole pattern.

Configurable round adapter for vacuum hoses, shop vacuums, dust ports and power tools.

Parametric adapter for vacuum hoses, dust extraction and power tools.

Custom offset adapter for door handles, rosettes and lock mounting patterns.

Customizable pipe connector with two mounting flanges and screw holes.

Custom adapter for connecting and securing drain hoses.

Custom repair adapter for drawers and sliding rail systems.

Custom spacer adapter for drawer slides and furniture hardware.

Custom dust extraction adapter for drilling work.

Customizable pipe and hose adapter with mounting flange.

Custom adapter plate for furniture handles with different hole spacing.

Centre a thread cone on an existing vertical spool pin with custom taper, height and bore. Check thread routing and the stability of the original stand.

Replace a broken crisper vent slider: set length, thickness, slot pitch and grip height to suit existing straight tracks. Measure the original first.

Tuner button too large or thin for standard winders? Set the rectangular socket, depth and cross handle to your dimensions. For careful manual use.

Sieve small glaze batches into a matching cup: set opening, support and bolt circle. Two rings clamp separate sieve mesh with six metal fasteners.

Match a humbucker ring to a curved guitar top: configure opening, screw spacing, height and longitudinal radius. Existing pickup hardware is separate.

L-bracket with three selectable hole groups per leg.

Customizable machine foot with screw hole and recessed pocket.

Customizable adapter with magnet pockets and screw holes.

Replace a shock mount inner ring: adapt diameter, height, cord holes and clamp screw. Reuse the outer frame and add separate soft protective padding.

Adapt a round stage opening for a glass slide: configure seating diameter, slide size and light aperture, with a supporting flange and removal recesses.

Custom adapter for monitor stands and display mounts.

Fill a small sewing-table gap: customise outer size, thickness and open machine cutout. For an existing supporting rebate and a simple free-arm shape.

Collect threads and fabric trimmings: adapt bin size and hooks to an existing straight overlocker lip. Measure the mounting point before ordering.

Centre a paper or label roll on a suitable holder axle: customise core diameter, axle bore, insertion depth and flange. Print two pieces per roll.

Round reducer and transition adapter with selectable insertion direction, smooth sockets or retaining ribs.

Configurable intake, pump and blower flange with pipe connection, tapered transition, four mounting holes and a continuous flow channel.

Parametric adapter plate for bolt circles, flanges, motors, pumps, fans and machinery – customize dimensions and hole patterns online.

Make a dust filter for a custom PC vent: set the opening, frame and magnet pockets. Uses separate filter mesh and a flat steel case mounting surface.

Custom spacer adapter for pipe clamps and wall mounting.

Customizable mounting adapter from round pipe to flat slot connection.

Pen does not fit your plotter clamp? Configure a slotted sleeve by pen diameter, clamp diameter and length, with a stop flange for suitable round clamps.

Custom adapter ring for radiator valves and smart thermostats.

Frame connector with seven layouts and ten settings.

Customizable adapter from a rectangular port to a round pipe.

Parametric servo arm with clamp hub, mounting hole row and selectable arm count.

Custom repair adapter for roller shutter belt guides and wall pass-throughs.

Custom adapter plate for roller shutter belt winders.

Custom ring adapter for routers, guide bushings and templates.

Make a label cover for manual record cleaning: set diameter, gasket groove and bolt hole. Print two discs and add separate matching sealing gaskets.

Customizable replacement shelf support with mounting pin.

Customizable adapter for drain, siphon, hose and wastewater connections.

Custom floor guide for sliding doors, wardrobes and custom furniture.

Customizable spacer with slotted hole for flexible mounting.

Replace a broken release rocker: customise width, pivot bore and latch position. For accessible vacuum connectors with a separate metal pin and spring.

Replace a missing chisel guard: set clear width, thickness and insertion depth to the blade. A flexible TPU design for storing tools in a drawer.

Custom adapter for connecting round table legs to square mounting surfaces.

Custom leveling and spacing wedge for tiles, panels and installation work.

Custom wall mount adapter for tool chargers, power supplies and battery stations.

Customizable clamp block for rods, tubes, shafts and brackets.

Parametric clamping sleeve with two different inner diameters and screw clamp.

Customizable mounting plate with grid holes for devices, modules and brackets.

Mounting plate with seven selectable hole and slot layouts.

Customizable spacer with center hole and optional base.

Customizable adapter for vacuum, dust extraction and workshop hoses.

Customizable adapter for vacuums, sanders, saws, routers and tools.

Custom wall mount adapter for vacuum cleaners and charging systems.

Custom VESA mounting plate for displays and monitor adapters.

Customizable wall hook mount with screw holes.

Customizable wall and panel passthrough for pipes, hoses and dust extraction.

Configure an extension for a short rectangular toilet flush rod. Set socket size and effective added length; only for suitable push-operated mechanisms.

Custom adapter for relocating window handles and non-standard mounting holes.

Custom adapter for limiting window opening positions.

Customizable Y adapter for connecting or splitting hoses.

Customizable zip tie mount with central screw hole.