Adapter

Custom vacuum connector release rocker

Name: Custom vacuum connector release rocker
Brand: BuildYour3D
SKU: staubsauger_entriegelungswippe
Price: 3.66 EUR
Availability: InStock

Replace a broken release rocker: customise width, pivot bore and latch position. For accessible vacuum connectors with a separate metal pin and spring.

0 Likes

★★★★★

0.0/5 · 0 Ratings

🧩 Configure now ← Back to category

parameters

8 adjustable

Variants

0 ideas

If only the release paddle breaks, the connector may still be reusable. This model forms a rigid lever with a pivot bore and latch. The original separate spring provides return force; the printed body is not a flexure spring. What you can customise: Customisable: Rocker length. Customisable: Width along metal pivot. Customisable: Paddle thickness. How to measure: 1. Measure rocker length, width between supports and finished pivot bore. 2. Measure pivot and latch centres from the same short end. 3. Check latch projection, latch width and clearance for the separate spring. Assembly and trial fitting: 1. With the appliance off, dismantle only the accessible connector; retain its pin and spring. 2. Install the rocker and repeatedly hand-check return, engagement and release. 3D printing notes: Print a PETG prototype in the supplied side orientation, with a vertical pivot bore. Four to six perimeters, 0.2 mm layers; gently finish the bore. Fit and included geometry: Only for a rigid rocker with a separate pin and spring. Not a snap spring or seal; no universal device fit and no electrical interlocks.

🧩 Configure now

Recommendations

Best from Adapter

View all →

Custom two-lug bayonet dust hose adapter

Connect a dust hose to an existing bayonet socket: customise the spigot, insertion length and two opposed lugs to the measured connector geometry.

Parametric Aluminum Profile Slot Adapter Plate

Customizable mounting plate for 2020, 3030 and 4040 aluminum extrusion profiles.

Custom large-format camera lens board

Fit a lens to a compatible large-format camera: configure board dimensions, rear register and lens opening, with an adjustable vertical hole offset.

Parametric Cabinet Hinge Repair Adapter Plate

Custom repair plate for damaged or torn-out cabinet hinges.

Parametric Cable Conduit Splitter

Customizable Y adapter for splitting cable conduits, cable ducts and protective tubes.

Parametric Cable Grommet with Screw Flange

Customizable cable passthrough with round flange and four screw holes.

FAQ

Frequently asked questions

What is Configurable 3D component intended for?

Configurable 3D component is a configurable model in the Adapter category. When an off-the-shelf part does not fit, configure this parametric configurable 3d component for your project: adjust the dimensions, check the preview, download the STL or order the 3D… It is suitable as a starting point for 3D printing or technical review.

Which dimensions can I adjust for Configurable 3D component?

The available input fields define the dimensions of the generated model, for example Length, Width, Specific dimension. Please check the preview and the displayed overall dimensions before ordering.

Is the STL generated from my inputs?

Yes. The STL is generated from the entered parameters and prepared for download or email delivery after payment.

Can I open the STL in Bambu Studio, Cura or PrusaSlicer?

The generated STL is suitable as a starting point for common slicers. Please review orientation, scale, material and print settings in your slicer software.

Do I need to check dimensions and tolerances before buying?

Yes, please check dimensions before ordering. Fit, strength and tolerances depend on material and print settings; the preview and overall dimensions help with verification.

Which material is suitable for Configurable 3D component?

PLA is useful for samples and simple parts, PETG for tougher applications and ASA for outdoor or higher-temperature use. Load, tolerance and print orientation matter.

Can I download Configurable 3D component as an STL or order it printed?

Yes. After configuration you can use the generated model for STL download or continue to the 3D printing order flow with price calculation.

What are typical uses for Configurable 3D component?

Typical uses include custom dimensions, repairs, prototypes and mounting aids in the Adapter category. For functional parts, always verify load and fit in the final application.

Ratings

What andere sagen

★★★★★

0.0/5 · 0 Ratings

Submit rating

Please Name, E-Mail, Sterne and Kommentar eintragen.

Name

Wed nur zur Spam-Abwehr genutzt (im Backend gehasht gespeichert).

Rating

★★★★★

Comment

Fotos (optional)

Bis zu 5 Bilder, JPG/PNG/WebP, maximal 5 MB pro Bild.

Latest reviews

Noch no Bewertungen – sei der Erste 🙂