Werkzeug

Custom headshell gasket-to-stylus distance gauge

Name: Custom headshell gasket-to-stylus distance gauge
Brand: BuildYour3D
SKU: headshell_abstandslehre
Price: 3.66 EUR
Availability: InStock

Set cartridge position to your manual’s specification: customise the distance from headshell gasket to stylus tip, with an open cradle and visual mark.

0 Likes

★★★★★

0.0/5 · 0 Ratings

🧩 Configure now ← Back to category

parameters

9 adjustable

Variants

0 ideas

The open gauge supports the round connector of a detached headshell. Its front stop face references the gasket, and a cross marks the required longitudinal distance to the stylus tip. The stylus stays clear above the base. What you can customise: Adjustable: Stop face to stylus reference line. Adjustable: Clear cylindrical connector diameter. Adjustable: Axial cradle length. How to measure: 1. Find the exact gasket-face-to-stylus distance in your turntable manual. 2. Measure connector diameter and axis height to keep cartridge and stylus clear above the base. 3. This is not tonearm overhang relative to the spindle; 52 mm is not universal. Assembly and trial fitting: 1. Print and verify stop-face-to-cross distance with an independent measuring tool. 2. Hold the detached headshell level, gently placing its gasket against the stop. 3. View the stylus position perpendicular to the cross; check parallelism and other setup separately per the manual. 3D printing notes: PETG or PLA on its base, 0.16–0.2 mm layers. Check stop and mark accuracy and a level footprint. Fit and included geometry: One length reference only, not complete cartridge alignment. The open cradle does not clamp the headshell. Never rest the stylus on plastic; no sound-quality promise.

🧩 Configure now

Recommendations

Best from Werkzeug

View all →

Custom oval bracelet forming mandrel

Shape soft jewellery wire around your own oval: set outside width, depth and height. A hollow forming mandrel with a base flange for gentle hand work.

Custom packaging belly-band scoring board

Score repeatable paper belly bands: set two alternating panel widths, band width and glue flap. A custom board with four grooves and two locating fences.

Custom bookbinding punching cradle

Pierce folded book signatures for sewing: configure cradle length, opening width and V angle, with an end stop and longitudinal clearance slot for an awl.

Custom book-cover corner marking guide

Mark consistent covering corners: adjust the allowance from the board corner and fence height. A triangular 45-degree guide for book covers and boxes.

Custom two-pin wire bending jig

Bend small wire loops repeatedly: set pin centres, bores and nut pockets. A printed base for two separate metal forming pins and soft craft wire.

Custom label height guide for round jars

Position labels at a repeatable height: configure jar diameter and label bottom-edge distance above the table, using a sideways-removable half-round guide.

FAQ

Frequently asked questions

What is Configurable 3D component intended for?

Configurable 3D component is a configurable model in the Werkzeug category. When an off-the-shelf part does not fit, configure this parametric configurable 3d component for your project: adjust the dimensions, check the preview, download the STL or order the 3D… It is suitable as a starting point for 3D printing or technical review.

Which dimensions can I adjust for Configurable 3D component?

The available input fields define the dimensions of the generated model, for example Specific dimension, Length, Height, Wall thickness, Width. Please check the preview and the displayed overall dimensions before ordering.

Is the STL generated from my inputs?

Yes. The STL is generated from the entered parameters and prepared for download or email delivery after payment.

Can I open the STL in Bambu Studio, Cura or PrusaSlicer?

The generated STL is suitable as a starting point for common slicers. Please review orientation, scale, material and print settings in your slicer software.

Do I need to check dimensions and tolerances before buying?

Yes, please check dimensions before ordering. Fit, strength and tolerances depend on material and print settings; the preview and overall dimensions help with verification.

Which material is suitable for Configurable 3D component?

PLA is useful for samples and simple parts, PETG for tougher applications and ASA for outdoor or higher-temperature use. Load, tolerance and print orientation matter.

Can I download Configurable 3D component as an STL or order it printed?

Yes. After configuration you can use the generated model for STL download or continue to the 3D printing order flow with price calculation.

What are typical uses for Configurable 3D component?

Typical uses include custom dimensions, repairs, prototypes and mounting aids in the Werkzeug category. For functional parts, always verify load and fit in the final application.

Ratings

What andere sagen

★★★★★

0.0/5 · 0 Ratings

Submit rating

Please Name, E-Mail, Sterne and Kommentar eintragen.

Name

Wed nur zur Spam-Abwehr genutzt (im Backend gehasht gespeichert).

Rating

★★★★★

Comment

Fotos (optional)

Bis zu 5 Bilder, JPG/PNG/WebP, maximal 5 MB pro Bild.

Latest reviews

Noch no Bewertungen – sei der Erste 🙂