Optik & Fotografie

Gel filter frame for custom flash heads

Name: Gel filter frame for custom flash heads
Brand: BuildYour3D
SKU: blitzfilter_folienrahmen
Price: 3.66 EUR
Availability: InStock

Hold a cut colour gel in front of a small flash. Match light window and insertion gap to gel and flash head. Set your dimensions, 3D print and check the fit on the.

0 Likes

★★★★★

0.0/5 · 0 Ratings

🧩 Configure now ← Back to category

parameters

4 adjustable

Variants

0 ideas

Hold a cut colour gel in front of a small flash. Match light window and insertion gap to gel and flash head. What you can customise: Adjustable: Length Adjustable: Width Adjustable: Clear gap How to measure: 1. Measure on the matching part: Length, Thickness. 2. Measure on the matching part: Width. 3. Measure on the matching part: Clear gap. Assembly and trial fitting: 1. Print, smooth edges and check working dimensions. 2. Slide gel in from side, attach with a separate strap and leave an air gap. 3. Try on a sample first without forcing. 3D printing notes: PETG. Flat side on bed; inspect insertion-slot bridges in slicer. Starting point: 0.2 mm layers, four walls, solid skins. Measure contact dimensions. Fit and included geometry: No hot continuous lights. Check temperature at low power and keep vents clear. Additional items: Matching workpiece; accessories are not included in the printed geometry.

🧩 Configure now

Recommendations

Best from Optik & Fotografie

View all →

Custom slip-on Bahtinov focusing mask

Configure a Bahtinov mask for your telescope tube: choose mounting diameter, slit pitch and collar height, with measuring and printing guidance.

Slide mount assembly nest for custom frame sizes

Position loose slide mount halves during film assembly. A stepped pocket supports the frame and leaves the image area open.

Target ramp for macro focus comparisons

Position a paper test target at a repeatable incline. Set length, width and angle for a macro setup. Set your dimensions, 3D print and check the fit on the actual.

Custom TPU eyecup for round eyepieces

Replace a missing round eyepiece eyecup: set mounting diameter, height and eye opening. Designed for soft TPU with a trial fit on your own eyepiece.

FAQ

Frequently asked questions

What is Configurable 3D component intended for?

Configurable 3D component is a configurable model in the Optik & Fotografie category. When an off-the-shelf part does not fit, configure this parametric configurable 3d component for your project: adjust the dimensions, check the preview, download the STL or order the 3D… It is suitable as a starting point for 3D printing or technical review.

Which dimensions can I adjust for Configurable 3D component?

The available input fields define the dimensions of the generated model, for example Specific dimension. Please check the preview and the displayed overall dimensions before ordering.

Is the STL generated from my inputs?

Yes. The STL is generated from the entered parameters and prepared for download or email delivery after payment.

Can I open the STL in Bambu Studio, Cura or PrusaSlicer?

The generated STL is suitable as a starting point for common slicers. Please review orientation, scale, material and print settings in your slicer software.

Do I need to check dimensions and tolerances before buying?

Yes, please check dimensions before ordering. Fit, strength and tolerances depend on material and print settings; the preview and overall dimensions help with verification.

Which material is suitable for Configurable 3D component?

PLA is useful for samples and simple parts, PETG for tougher applications and ASA for outdoor or higher-temperature use. Load, tolerance and print orientation matter.

Can I download Configurable 3D component as an STL or order it printed?

Yes. After configuration you can use the generated model for STL download or continue to the 3D printing order flow with price calculation.

What are typical uses for Configurable 3D component?

Typical uses include custom dimensions, repairs, prototypes and mounting aids in the Optik & Fotografie category. For functional parts, always verify load and fit in the final application.

Ratings

What andere sagen

★★★★★

0.0/5 · 0 Ratings

Submit rating

Please Name, E-Mail, Sterne and Kommentar eintragen.

Name

Wed nur zur Spam-Abwehr genutzt (im Backend gehasht gespeichert).

Rating

★★★★★

Comment

Fotos (optional)

Bis zu 5 Bilder, JPG/PNG/WebP, maximal 5 MB pro Bild.

Latest reviews

Noch no Bewertungen – sei der Erste 🙂