Enclosures & electronics STL guides ·
Wire soldering jig STL: Create a Custom-Size 3D Model
Create a custom-size wire soldering jig STL for your own 3D printer. Check the model controls, measure the fit and buy the generated digital file.
The three-piece set contains an open base and two clamp bars. Seat insulated wire sections in the round grooves, leaving the bare ends free between the jaws. Turn the bars groove-side down and secure them with four M3 screws of your own; first tap the 2.5 mm base holes to suit. Set wire diameter, jaw gap, working height, grip length and base width for your setup. Work only on disconnected wires. Keep hot metal and the soldering iron away from the plastic, clamp delicate insulation gently and place your own heat-resistant work mat beneath the open window.
With the Wire soldering jig with an open work window and clamp bars template, you can turn those measurements into a custom-size STL. Review controls such as insulated wire outside diameter, clear gap between jaws, wire centre height, check your model in the preview and choose the digital file. You buy the generated STL and print it on your own 3D printer, using your preferred filament and slicer settings.
Measurements for your wire soldering jig STL
The product page exposes the following useful geometry controls. Work from your measured parts and check the displayed units and the preview before entering final values.
| Model control | What to check |
|---|---|
| Insulated wire outside diameter | Measure the external mating surface; compare it with the receiving opening. |
| Clear gap between jaws | Check this feature against the matching component and confirm its effect in the 3D preview. |
| Wire centre height | Measure from the relevant seating surface and check the available vertical clearance. |
| Clamping length | Check both endpoints of the named feature, including its working reach or engagement. |
| Base width | Measure across the named feature and allow space for the neighbouring parts. |
Measure from a repeatable reference
For a guide or marking tool, choose the face or edge that will locate against the workpiece before entering dimensions. The location of a feature and its size are different measurements. Check the generated tool against an expendable sample first, especially if a small error would be repeated across several workpieces.
Configure the model, buy the STL and print locally
- Open the wire soldering jig product page and compare the model preview with your application.
- Enter the relevant measurements. Use the units displayed beside each input; convert inch measurements before using a millimetre field.
- Review the complete geometry and keep a record of your parameter values. Check small openings, mating features and remaining wall thickness.
- Choose the digital STL purchase option and review the current price and order details before payment.
- After receiving the STL, open it in your slicer, confirm the imported dimensions and inspect the layer preview before printing.
Configure my wire soldering jig STL
Check a first print before making more
A CAD dimension and a printed dimension can differ. Print a fit sample or one prototype before making a batch, and check the features that contact other parts. Choose print orientation, supports and material for the actual geometry and application. There is no universal clearance or print profile that guarantees the fit on every machine.
Before you choose your STL
Why configure the model instead of scaling a download?
Uniform scaling changes all dimensions together. Here you can work with the available controls, including insulated wire outside diameter, clear gap between jaws, wire centre height, and check the result before purchase. Keep your input values for later revisions: the downloaded STL contains the final mesh, rather than the original parametric editing history.
What do I buy?
Select the digital STL option for the file you will print yourself. Review the current price and selected configuration before paying. Ordering a finished print is a separate option.
Make the next print fit your project
Have your measurements ready? Open the wire soldering jig template, adjust the model and inspect the preview. When the geometry matches what you need, choose your STL and take it to your own printer.
Next step