Skip to main content

Crafts & design STL guides ·

Clay bevel guide STL: Create a Custom-Size 3D Model

Create a custom-size clay bevel guide STL for your own 3D printer. Check the model controls, measure the fit and buy the generated digital file.

clay bevel guide STLcustom clay bevel guideparametric 3D model
Clay bevel guide with wire anchors and custom bevel depth — configurable 3D model for a custom-size STL
Clay bevel guide with wire anchors and custom bevel depth — configurable 3D model for a custom-size STL

Cut a defined bevel along the upper edge of a soft clay slab. This open guide frame holds your cutting wire between two 1.2 mm anchor holes; its small flat sole rides on the clay surface. Choose the bevel depth at the side edge, the angle to the surface and the tool width. Thread suitable fine wire through the holes, stretch it straight across the open front and secure both ends outside. Defaults give a 4 mm deep and 4 mm wide bevel at 45 degrees. The slab must be thicker than the selected bevel.

With the Clay bevel guide with wire anchors and custom bevel depth template, you can turn those measurements into a custom-size STL. Review controls such as bevel depth at side edge, angle to clay surface, tool width, check your model in the preview and choose the digital file. You buy the generated STL and print it on your own 3D printer, using your preferred filament and slicer settings.

Start with my measurements

Measurements for your clay bevel guide STL

The product page exposes the following useful geometry controls. Work from your measured parts and check the displayed units and the preview before entering final values.

Model controlWhat to check
Bevel depth at side edgeCheck the usable depth and any stop, shoulder or component behind it.
Angle to clay surfaceMeasure the orientation relative to the same reference face shown in the preview.
Tool widthMeasure across the named feature and allow space for the neighbouring parts.

Measure from a repeatable reference

For a guide or marking tool, choose the face or edge that will locate against the workpiece before entering dimensions. The location of a feature and its size are different measurements. Check the generated tool against an expendable sample first, especially if a small error would be repeated across several workpieces.

Configure the model, buy the STL and print locally

  1. Open the clay bevel guide product page and compare the model preview with your application.
  2. Enter the relevant measurements. Use the units displayed beside each input; convert inch measurements before using a millimetre field.
  3. Review the complete geometry and keep a record of your parameter values. Check small openings, mating features and remaining wall thickness.
  4. Choose the digital STL purchase option and review the current price and order details before payment.
  5. After receiving the STL, open it in your slicer, confirm the imported dimensions and inspect the layer preview before printing.

Configure my clay bevel guide STL

Check a first print before making more

A CAD dimension and a printed dimension can differ. Print a fit sample or one prototype before making a batch, and check the features that contact other parts. Choose print orientation, supports and material for the actual geometry and application. There is no universal clearance or print profile that guarantees the fit on every machine.

Before you choose your STL

Why configure the model instead of scaling a download?

Uniform scaling changes all dimensions together. Here you can work with the available controls, including bevel depth at side edge, angle to clay surface, tool width, and check the result before purchase. Keep your input values for later revisions: the downloaded STL contains the final mesh, rather than the original parametric editing history.

What do I buy?

Select the digital STL option for the file you will print yourself. Review the current price and selected configuration before paying. Ordering a finished print is a separate option.

Make the next print fit your project

Have your measurements ready? Open the clay bevel guide template, adjust the model and inspect the preview. When the geometry matches what you need, choose your STL and take it to your own printer.

Next step

Ready for the next step?

Minimum order value not yet reached

Physical 3D prints require a minimum order value of €10.00. You still need . Digital STL files and shipping costs do not count toward the minimum order value.

You can select more products or increase the quantity of an existing 3D print.

Photo to 3D

What would you like to create? Choose an option – you will upload your source on the next page.

Example of a 3D relief created from a photo Photo to ReliefTurn your photo into a tactile 3D relief.Proven relief configurator · STL or printed partStart now → Example of a personalized 3D figurine created from a photo Photo to FigurineTurn your photo into a personalized 3D figurine with individual shape and color.Turntable preview · print or digital STLStart now → Floor plan and the spatial 3D model created from it Floor Plan to 3DTurn your floor plan into a spatial 3D model with detected walls and openings.Review preview · confirm recognition and assumptionsStart now → Technical drawing and the 3D part created from it Drawing to 3DCreate a printable 3D model from a technical drawing when geometry and dimensions can be identified clearly.Review preview · verify dimensions and viewsStart now →