Zum Hauptinhalt springen
BuildYour3D logo
BuildYour3D
📤 Upload file 🧩 Create Spare Part 📸 Photo → Relief 🧱 Map → 3D Model
Cross connector for drawer dividers of different thicknesses

Adapters & connections

Cross connector for drawer dividers of different thicknesses

Join four cut-to-length drawer dividers without cross-lap slots. Set two board thicknesses, engagement and height; open bottoms keep boards on the drawer floor.

0 Likes
★★★★★
0.0/5 · 0 Ratings

STL file: Price currently unavailable.

Finished 3D print: calculate the price after creating your model.

Create my part now ← Back to category
parameters
6 adjustable
Variants
0 ideas
For drawer layouts made from your own wood or plastic strips, this small cross node joins four separate board ends. The two axes can accept different thicknesses. The boards do not cross through one another. What you can customise: Set two board thicknesses independently. Adjust engagement and connector height to the strips. Slots open above, below and at the outer ends. How to measure: 1. Measure actual board thickness including any finish. 2. Measure drawer interior and plan the compartments. 3. Plan four strip lengths to the central stops. Assembly and trial fitting: 1. Print one trial connector and smooth its edges. 2. Insert four separate strips to their respective stops. 3. Check the assembly in the drawer; use suitable thin shims if loose. 3D printing notes: Evaluate PLA or PETG for dry indoor use. Print upright in the supplied orientation; no supports intended. Test clearance on one strip first. Fit and included geometry: One connector, boards separate. For light drawer dividers, not structural furniture joints. A centre connector does not secure loose outer strip ends.
Create my part now

Recommendations

Best from Adapters & connections

View all →
Rectangular profile
Rectangular profile
Configure a custom rectangular profile online and adjust Length, Width and Wall thickness to your application.
Desk cable grommet
Desk cable grommet
Configure a custom desk cable grommet online and adjust Diameter, Thickness, Specific dimension and Wall thickness to your application.
Hinge repair plate
Hinge repair plate
Configure a custom hinge repair plate online and adjust Specific dimension and Width to your application.
Universal connector
Universal connector
Configure a custom universal connector online and adjust Specific dimension to your application.
Pipe wall clip
Pipe wall clip
Configure a custom pipe wall clip online and adjust Specific dimension, Wall thickness and Width to your application.
L-shaped angle bracket
L-shaped angle bracket
Configure a custom l-shaped angle bracket online and adjust Specific dimension, Thickness and Height to your application.

FAQ

Frequently asked questions

What is Custom mounting part intended for?

Custom mounting part is a configurable model in the Mounting profiles category. When an off-the-shelf part does not fit, configure this parametric custom mounting part for your project: adjust the dimensions, check the preview, download the STL or order the 3D printed… It is suitable as a starting point for 3D printing or technical review.

Which dimensions can I adjust for Custom mounting part?

The available input fields define the dimensions of the generated model, for example Thickness, Specific dimension, Depth, Height, Wall thickness. Please check the preview and the displayed overall dimensions before ordering.

Is the STL generated from my inputs?

Yes. The STL is generated from the entered parameters and prepared for download or email delivery after payment.

Can I open the STL in Bambu Studio, Cura or PrusaSlicer?

The generated STL is suitable as a starting point for common slicers. Please review orientation, scale, material and print settings in your slicer software.

Do I need to check dimensions and tolerances before buying?

Yes, please check dimensions before ordering. Fit, strength and tolerances depend on material and print settings; the preview and overall dimensions help with verification.

Which material is suitable for Custom mounting part?

PLA is useful for samples and simple parts, PETG for tougher applications and ASA for outdoor or higher-temperature use. Load, tolerance and print orientation matter.

Can I download Custom mounting part as an STL or order it printed?

Yes. After configuration you can use the generated model for STL download or continue to the 3D printing order flow with price calculation.

What are typical uses for Custom mounting part?

Typical uses include custom dimensions, repairs, prototypes and mounting aids in the Mounting profiles category. For functional parts, always verify load and fit in the final application.

Ratings

What andere sagen

★★★★★
0.0/5 · 0 Ratings

Submit rating

Please Name, E-Mail, Sterne and Kommentar eintragen.

Wed nur zur Spam-Abwehr genutzt (im Backend gehasht gespeichert).

★★★★★

Bis zu 5 Bilder, JPG/PNG/WebP, maximal 5 MB pro Bild.

Latest reviews

Noch no Bewertungen – sei der Erste 🙂

Mindestbestellwert noch nicht erreicht

Für physische 3D-Drucke gilt ein Mindestbestellwert von 10,00 €. Dir fehlen noch . Digitale STL-Dateien und Versandkosten zählen nicht zum Mindestbestellwert.

Du kannst weitere Produkte auswählen oder die Menge eines vorhandenen 3D-Drucks erhöhen.

Continue shopping Increase quantity

Photo to 3D

What would you like to create? Choose an option – you will upload your source on the next page.

Photo to Relief Photo to ReliefTurn your photo into a tactile 3D relief.Proven relief configurator · STL or printed partStart now → Photo to Figurine Photo to FigurineNew · currently being testedTurn your photo into a full 3D figurine.Turntable preview · print or digital STLStart now → Floor Plan to 3D Floor Plan to 3DNew · currently being testedTurn a floor plan into a spatial wall and opening preview.Review preview · confirm recognition and assumptionsStart now → Drawing to 3D Drawing to 3DNew · currently being testedCreate a 3D part from a technical drawing.Review preview · verify dimensions and viewsStart now →