Garden & plants

Three-point bending holder with an adjusting screw for slender shoots

Name: Three-point bending holder with an adjusting screw for slender shoots
Brand: BuildYour3D
SKU: jungtrieb_dreipunkt_biegehalter_spindel_mass
Price: 3.66 EUR
Availability: InStock

Gently position a thin, flexible plant shoot between two outer support points.

0 Likes

★★★★★

0.0/5 · 0 Ratings

STL file: Price currently unavailable.

Finished 3D print: calculate the price after creating your model.

Create my part now ← Back to category

parameters

5 adjustable

Variants

0 ideas

Two outer hooks and a centre saddle provide three contact points on one slender shoot. The printed adjusting screw changes the centre saddle position. Match the support span, shoot clearance, adjustment range, hook width and saddle width to the plant. The shoot clearance must already include your own soft protective pads. The set contains the frame, screw and loose saddle; its blind socket rests on the smooth screw tip. Turn only by hand and just enough to guide a young flexible shoot gently. Check bark, growth and pressure marks frequently and remove the holder in time. For small shaping trials, not bending stiff branches or trunks. Holding force and long-term durability have not been established. Adjustable values: Distance between outer hooks: 40–80 mm; Clear shoot size including your padding: 3–9 mm; Usable screw adjustment range: 8–20 mm; Width of the two hooks: 6–12 mm; Centre pressure-saddle width: 8–16 mm. Have your own 3D printer? Configure the dimensions, purchase the STL file and download the 3D model to print yourself. Without a printer, have us make the part: choose a material, calculate the price online, then order and pay online. Geometry has been digitally checked. No physical test print has been carried out. The product image is a photorealistic AI visualization of the default dimensions. Mentioned third-party accessories are not included.

Create my part now

Recommendations

Best from Garden & plants

View all →

Air-layering box halves with custom stem openings

Two identical box halves enclose moist moss or another suitable rooting medium around an attached branch during air layering.

Paper seedling pot maker with custom pressing base

Wrap a paper strip around the cylinder, fold the lower overhang inward and press the bottom against the separate base.

Rim bridge with an open channel for a watering wick

Guide your own wick over a pot rim: set rim width, leg depth and channel size.

Leaf-cleaning tongs for your soft cleaning pads

Two broad pad carriers for gently wiping smooth plant leaves, sized for your project.

Split watering ring with soil collar for planters

Define the watering area in a planter with a split ring and visible insertion mark.

Plant drip tray with slope and open drain chute

Direct runoff through a sloped tray with four level supports for the plant pot.

FAQ

Frequently asked questions

What is Configurable 3D component intended for?

Configurable 3D component is a configurable model in the Garten & Pflanzen category. When an off-the-shelf part does not fit, configure this parametric configurable 3d component for your project: adjust the dimensions, check the preview, download the STL or order the 3D… It is suitable as a starting point for 3D printing or technical review.

Which dimensions can I adjust for Configurable 3D component?

The available input fields define the dimensions of the generated model, for example Specific dimension, Diameter, Width. Please check the preview and the displayed overall dimensions before ordering.

Is the STL generated from my inputs?

Yes. The STL is generated from the entered parameters and prepared for download or email delivery after payment.

Can I open the STL in Bambu Studio, Cura or PrusaSlicer?

The generated STL is suitable as a starting point for common slicers. Please review orientation, scale, material and print settings in your slicer software.

Do I need to check dimensions and tolerances before buying?

Yes, please check dimensions before ordering. Fit, strength and tolerances depend on material and print settings; the preview and overall dimensions help with verification.

Which material is suitable for Configurable 3D component?

PLA is useful for samples and simple parts, PETG for tougher applications and ASA for outdoor or higher-temperature use. Load, tolerance and print orientation matter.

Can I download Configurable 3D component as an STL or order it printed?

Yes. After configuration you can use the generated model for STL download or continue to the 3D printing order flow with price calculation.

What are typical uses for Configurable 3D component?

Typical uses include custom dimensions, repairs, prototypes and mounting aids in the Garten & Pflanzen category. For functional parts, always verify load and fit in the final application.

Ratings

What andere sagen

★★★★★

0.0/5 · 0 Ratings

Submit rating

Please Name, E-Mail, Sterne and Kommentar eintragen.

Name

Wed nur zur Spam-Abwehr genutzt (im Backend gehasht gespeichert).

Rating

★★★★★

Comment

Fotos (optional)

Bis zu 5 Bilder, JPG/PNG/WebP, maximal 5 MB pro Bild.

Latest reviews

Noch no Bewertungen – sei der Erste 🙂

Datenschutz-Einstellungen

Three-point bending holder with an adjusting screw for slender shoots

Best from Garden & plants

Frequently asked questions

What andere sagen

Submit rating

Latest reviews

Mindestbestellwert noch nicht erreicht

Photo to 3D