Custom Vent Grilles Online – for PC Cases, Furniture, Radiators & Sheds

Custom vent grilles for every use case

Off-the-shelf vent grilles from the hardware store rarely fit the existing cutout exactly - too wide, too narrow, wrong hole pattern, or the mounting doesn't match. With our parametric configurator you enter width, height, hole pattern, and mounting type yourself, and the vent grille is produced to fit your exact use case with 3D printing.

PC fan grilles for 80, 92, 120, and 140 mm fans

One of the most common use cases is a custom PC fan grille: anyone who wants to improve airflow in their case, add a dust filter grille, or replace a broken factory grille can match the hole circle, outer dimensions, and mounting holes exactly to the fan. All common fan sizes from 80 mm to 140 mm are supported.

Vent grilles for furniture, cabinets, and plinths

Electronics in a cabinet, a fridge in a kitchen niche, or plinth panels under cabinets all need sufficient airflow. The clip-frame vent grille simply snaps into the existing cutout - no visible screws needed.

Vent grilles for radiator covers

For radiator covers and furniture panels, a vent grille with elongated slots and side mounting flanges provides the warm-air outlet needed while keeping the radiator hidden from view.

Vent grilles and covers for sheds, garden houses, and outdoor use

Outdoors too - on garden sheds, tool sheds, garages, or utility rooms - a custom vent grille with a mounting flange provides ventilation while keeping out insects and rain. For outdoor use we recommend weather-resistant materials such as ASA, which is significantly more UV- and weather-resistant than PETG.

Wall and cable pass-through with integrated vent ring

For cable, pipe, or hose pass-throughs through a wall or piece of furniture, there's a combined model with an integrated vent ring that combines the pass-through and ventilation in a single part.

Round vent rosette for pipes

For a clean finish on pipe pass-throughs, a round vent rosette with a spoke pattern and centering ring is available, optionally with screw holes for mounting.

Vent cover with a custom perforation pattern

If you prefer a discreet, even look, you can configure a vent cover with an offset perforation pattern, including optional mounting holes.

Typical applications

• PC cases and fan covers
• Furniture, cabinets, and plinth panels
• Radiator covers
• Garden sheds and tool sheds
• Garages and utility rooms
• Wall and cable pass-throughs
• Pipe end covers and vent rosettes
• Custom perforation pattern covers

FAQ

Can I order a vent grille to my own custom dimensions?

Yes. In the configurator you enter width, height, hole pattern, and mounting type yourself, and the vent grille is produced to fit exactly.

Are there vent grilles for PC fans in 80, 92, 120, or 140 mm?

Yes, the PC fan grille supports all common fan sizes with a matching hole circle and mounting holes.

Are the vent grilles suitable for outdoor use, e.g. on a shed?

Yes. For outdoor use we recommend weather-resistant materials such as ASA instead of PETG.

Can I combine a cable or pipe pass-through with a vent ring?

Yes, there's a dedicated model that combines a pass-through and a vent ring in a single part.

Do I get a price right away?

Yes. Once configured, a price for 3D printing is calculated automatically.