PLA vs PETG vs ASA: Vergleich, Anwendungen & schnelle Entscheidungshilfe
Du willst drucken (oder drucken lassen) – aber fragst dich: PLA, PETG or ASA? These three materials cover most projects. The right choice determines Stability, Temperature, UV/Outdoor and Lifetime.
Quick decision guide (30 seconds)
- prototype / Deko / Passformtest → PLA
- spare part / holderung / Funktionsteil → PETG
- Outdoor / sun / permanent → ASA
Tip: If heat or sun is involved, choose PETG/ASA instead of PLA.
In diesem Artikel bekommst du einen praxisnahen Überblick über die wichtigsten 3D printing materials - with focus on PLA, PETG and ASA. Plus: typical applications, printing tips and a quick checklist of which filament fits when.
- Basics: what matters when choosing 3D printing materials
- Quick comparison PLA vs PETG vs ASA
- PLA: Eigenschaften, applicationen, Grenzen
- PETG: der Allroander für funktionale parte
- ASA: Outdoor & UV - when it has to be "durable"
- Which materialwahl für welches part? (Beispiele)
- printtipps & typische error (Warping, Stringing, Layerhaftung)
- Also wanted
- FAQ
Basics: what really matters when choosing 3D printing materials
„Stabil“ ist nicht gleich stabil. Je nach Einsatz sind unterschiedliche Eigenschaften entscheidend. You should always check these points for 3D printing material:
- Temperature resistance: Wed das part warm (Sonne, Auto, Nähe Heizung)?
- Toughness / Impact resistance: Muss es Stöße abkönnen or darf es spröde sein?
- Rigidity: Soll es sich kaum biegen or darf es nachgeben?
- UV & weather resistant: Outdoor? Then UV is a must.
- Optics & Surface: Decoration/presentation vs. functional part.
- printbarkeit: Warping, stringing, layer adhesion.
Quick comparison: PLA vs PETG vs ASA
| Criterion | PLA | PETG | ASA |
|---|---|---|---|
| printbarkeit | Very easy (beginner) | Leicht–withtel (Stringing möglich) | Mittel–anspruchsvoll (Warping, ideal with Einhausung) |
| Stiffness | High (stiff), but rather brittle | Good mix: tough + sufficiently rigid | Stable & tough (similar to ABS, strong for outdoor) |
| Temperature | Limited (heat may deform) | Better than PLA | Very good (warmer environments) |
| UV / Weather | Not ideal | Ok to good (depending on use) | Very good (outdoor classic) |
| Typical application | prototypes, Deko, Passformtests | Funktionsteile, brackets, spare parts | Outdoor-holder, Außen-Gehäuse, UV-belastete parte |
PLA: fast, clean, ideal für prototypes
PLA ist sehr beliebt, weil es leicht zu drucken ist und gute Oberflächen macht. Für prototypes, Design-parte or Fitting tests ist PLA oft perfekt.
- prototypes (Form/Passung)
- Decoration, displays, interior housings
- modele, holder without hohe Last/Hitze
Limit: PLA kann bei Wärme (Sonne hinter Glas, Auto, Nähe Heizkörper) weich werden. Für belastete oder warme Umgebungen ist PETG/ASA meist besser.
PETG: der Allroander für spare parts & Funktionsteile
PETG ist für viele Projekte die beste Wahl: zäher als PLA, weniger spröde und alltagstauglich. Ideal für spare parts, brackets and funktionale parte.
- spare parts im Haushalt / Werkstatt
- brackets, Clips, Montage-parte
- Housings, covers, adapters
Typisch bei PETG ist Stringing (Fäden). Mit passenden Einstellungen ist das gut beherrschbar.
ASA: UV & weatherproof - ideal for outdoor use
ASA ist robust, temperaturfest and vor allem UV-resistant. Wenn dein Teil dauerhaft draußen ist (Sonne, Regen, Temperaturwechsel), ist ASA häufig die beste Option.
- Outdoor-brackets (Kamera, Sensor, Schild, Kabel)
- Outdoor housing
- parte in warmen Umgebungen
ASA kann zu Warping neigen. Professioneller Druck bzw. stabile Bedingungen helfen hier massiv.
Which material should you choose for each part? Practical examples
| part / application | Recommendation | Why |
|---|---|---|
| Passformtest / prototype | PLA | Schnell, günstig, clean – ideal um Maße zu prüfen. |
| holderung / spare part inner | PETG | Zäh, robust, less spröde, alltagstauglich. |
| Outdoor-holder / UV-belastet | ASA | UV- and witterungsbeständig, dauerhaft stabil. |
| Housing interior | PETG or PLA | Depending on heat/load - PETG, if you want it to "hold securely". |
printtipps: typische error fast lösen
- Warping (corners lift off): häufiger bei ASA. Hilft: stabile Umgebung, cleanes Bett, ggf. Einhausung.
- Stringing (threads): more often at PETG. Helps: Fine-tune retraction/temperature.
- Brittleness / Breakage: eher PLA. Für belastete parte lieber PETG/ASA wählen.
- Layer adhesion: important for functional parts - do not print "too cold".
If you need a replacement part: upload your file, choose the material suitable for the application and calculate the price live.
Also wanted
PLA vs PETG, PETG vs ASA, ASA Outdoor, best filament for spare parts, temperature resistant filament, UV resistant filament, 3D printing material selection and 3D printing materials.
Choose the right material now - and get started right away
Upload your part, select PLA/PETG/ASA and see the price instantly. If you are unsure, just tell us the application + environment (indoor/outdoor/heat) - we will recommend the right material.
FAQ
Whichs material ist am besten für Anfänger?
PLA is the easiest to print and ideal for first prototypes and fit testing.
Which material is best for spare parts?
For many replacement parts, PETG is the best mix of stability and toughness. If the part is used outdoors or exposed to UV radiation, ASA is often the better choice.
PLA, PETG or ASA – welches material für Outdoor?
Für dauerhafte Outdoor-Anwendungen ist ASA meist am geeignetsten (UV- & Wetterbeständigkeit). PETG ist oft okay, aber für langfristige UV-Last ist ASA die robustere Wahl.
Can I see material selection and price directly online?
Yes, you can upload your file, select material and calculate the price live - then order directly.